Category: Workshop

Five days at McGregor Motorsport

Posted on July 5, 2018 | By admin | No comments

5th July 2018

This week was one I was so looking forward to but obviously there were so many factors that could change and not obtain a very significant part of the build. The K24A motor was fully re-built more than five years ago and had simply sat in the corner waiting to actually do what it was intended to do…start!

I was really lucky to have Evan Morgan solve the engine loom problems with a plug from a Honda Jazz Loom that he connected to the K24A loom. This while I am writing seems such a simple task, but it took nearly eight hours. Evan was extremely confident in the loom, however we were not that confident in the car loom being about to match Evan’s work! Well it proved to be true as the car loom had a mind of its own and many hours of searching and testing still left doubts hanging over the Friday start.

Friday 10:00am Evan arrived, attached his laptop to the ECU and loaded a startup program. I would love to say it started immediately but with many head scratching options it finally came to life…what a week!

Six Days in the new factory

Posted on May 2, 2018 | By admin | No comments

2nd May 2018
Christchurch has certainly become my second home in New Zealand after Wainui Beach; the last visit saw six great days fabrication at McGregor Motorsport. Scott and Delwyn have moved into a factory minutes from their home and now the steady stream of visitors, new builds, modifications to existing cars has a real buzz of energy. For me, it was seeing several milestones completed on my car and working alongside Scott and Mark was as always very positive indeed. This video edit is an overview of the progress, I head back to Christchurch next month and I am sure that we will be starting the motor for the first time…a sake moment

Eight days at McGregor Motorsport

Posted on March 27, 2018 | By admin | No comments

27th March 2018

It was an epic escape from the heaviest snow fall in nearly 25 years. To simply get to the airport from my home in Kanazawa to Osaka is normally a 350km journey. But I had to go north to come south and 650kms later I was at Kansai Airport ready to fly to Christchurch.

It is now 9 years ago that I sent the money to confirm my order and have McGregor Motorsport build me one of their Mach7 cars. Looking back at my first blog entry Monday 2nd March, 2009 I would never have predicted that in March 2018 I would be doing it all again.

This time it’s very different and certainly far more demanding than 2009. I only committed to a new build to support the new owners Scott and Delwyn and to make an entirely new car. This has been a ground up project, the new chassis and suspension had been in development for several years. We all agreed to go Honda powered, and while it’s been extremely challenging on a new canvas which would become the 2018 MMS MACHsr7 prototype.

So, where are we at…? I am back in Japan but in three weeks I will once again be in Christchurch for what I believe is the most significant event of the entire process. I will keep this under wraps but it’s a major step forward in having an exciting new McGregor Motorsport back in business. The culture has changed with new faces, new ideas and a positive future ahead.

February was recorded in video as usual….it was a great time!

Friday 16 December

Posted on December 16, 2017 | By admin | No comments

Progress….

Details are the key…

Posted on May 30, 2017 | By admin | No comments

30th May, 2017

Having a custom car being built 9,000km’s away is all about communication. Weekly if not daily contact bridges the distance and enables almost a long hand on approach. Being my second build from a distance I learnt so much from the first which can only make the second not just as good but simply better.

Scott having just purchased the company has picked up the ball and made the right progress. The transition has of course been a road full of bumps, surprises, disappointments, but these are simply expected and one can only have a positive attitude to never lower standards or expectations. Scott has been remarkable in this respect; each hurdle has just been another challenge. Time delays, promised actions, challenging financials, come with becoming an owner of a business.

May has been a month of re-grouping and focusing on what we as a team can achieve; I have made a few very simple requests and the aim is to check them off step by step. The Engine is our primary focus, with so many parts missing or simply not up to standard we have gone to high quality bolt on parts with a proven history…this avoids the frustrations of building custom one off parts that may or may not work. We are back on track….no more used bolts and nuts of assorted sizes but a standardization through-out the build.

Bolt on…

Do it right…

Fabrication…

Wheels….and things…

Posted on May 8, 2017 | By admin | No comments

Monday 8^th May, 2017

This has been a very busy past month in the McGregor Workshop and I am certainly one to applaud the progress and take a wheel earned Beer Break

It’s great to have food for thought as all builds hit stumbling blocks which require change in directions that put the build back on track and thankfully Scott has the clear thinking and ability to stand back and find simple but effective solutions. Hubs, studs, spaces and offset all needed to be considered. But it has been solved and wheels and brakes and being attached.

We found a muffler that will work with the system and the radiator core arrived so Scott is really busy making with progress being made significantly this month.

Cool things are beginning to appear, the Fuse and ECU holder plus a little “bling” in an oil filler cap.

Fish’n’Chips + Beer

Posted on February 28, 2017 | By admin | No comments

Wednesday 1st March, 2017

In New Zealand nothing really compares to a good feed of Fish’n’Chips with beer to fuel the car build. Scott’s project this evening over dinner [fish’n’chips+beer] was to complete the brake lines which by all accounts was a very successful evening….well done McGregor Motorsport 2017!

Back together

Posted on February 27, 2017 | By admin | No comments

Monday 27th February, 2017

Once the welding was finished it was time to check all the components and begin to re-build the car. Scott has wisely decided after discussions about the build plan to assemble the entire car for testing to complete satisfaction before taking it all apart for painting, powder coating then assembly. I am still looking at door design and overall wet weather options…a nice project indeed.

Thursday 23 February, 2017

Posted on February 22, 2017 | By admin | No comments

WELDING

I have just arrived in New Zealand, caught with my Beach House yearly visit which was great. Now I am just counting the days until I am once again at McGregor Motorsport with Scott on the build progress. However progress is great with Mark doing the final welds on the chassis…then it’s back over and on its legs once again.